9235 Waterproofing Membrane

9235 Waterproofing Membrane is an easy to install, thin, load-bearing waterproofing membrane designed specifically for the special requirements of ceramic tile, stone and brick installations. It’s a perfect solution for wet areas and continuous water submersion applications.

9235 Waterproofing Membrane is a thin (.02” [.5mm]), load bearing, flexible, liquid applied waterproofing membrane system consisting of a liquid rubber polymer that is cold applied with an integral reinforcing fabric to provide a seamless waterproof membrane. It’s quickly applied with a paint brush or long nap paint roller to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates (including both common and less ordinary commercial substrates).  

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Features & Benefits

• Equipped with Microban^® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane
• Safe - No solvents and non-flammable.|Interior and exterior use
• Vertical and horizontal surfaces (including ceilings)
• Thin—only 0.02" (0.5 mm) thick when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• IAPMO and ICC Approval
• Applies quickly with a paint brush or roller—no special mixing or application equipment needed
• Fast cure—normally ready in hours for finishes
• Install tile brick and stone directly onto membrane
• UL GREENGUARD GOLD certified
• Easy cleanup—just use water while fresh
• Protects concrete & reinforcing steel from corrosion

• Product #: S-09235-NS-06 / 9235-0002-2 / 9235-0001-2
• Packaging Sizes:
  • 6GAL (23L) PAIL
  • 2GAL (7.6L) CARTON
• Part of System: LATICRETE^®