FRACTURE BAN® SC is easy and quick to apply for any interior or exterior and horizontal tile or stone installation needing antifracture protection. Applied in a single coat with a paint brush or roller, this rapid drying antifracture membrane allows you to install tile or stone in just 1-2 hours.
Equipped withMicroban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the membrane.
Features & Benefits
Exceeds ANSI A118.12 for anti-fracture protection of up to 1/8” (3 mm), preventing cracks from protruding up through your tile or stone installation
Wet coat thickness 30 – 40 mils (0.8 – 1.0 mm), only 0.020 – 0.030" (0.5 – 0.8 mm) thick when cured is easy to apply with a paint brush or roller in a single coat
Rapid drying time allows you to install tile or stone in just 1 to 2 hours
Does not require the use of fabric which is less time consuming and saves money
Changes from a light blue to darker blue color when cured to clearly indicate when it is ready to install tile or stone
“Extra Heavy Service” rating per TCNA performance levels (ASTM C627 Robinson Floor Test) provides you anti-fracture for any tile or stone installation
Equipped with Microban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the membrane
Install tile, brick and stone directly onto the anti-fracture membrane (no need to prime the substrate), saves you time on the installation
Packaging Sizes:
Commercial Unit: 3.5 gal (13.3 L) pail liquid (36 full units/pallet)
Mini Unit: 4 x 1 gal (3.8 L) pails of liquid packed in a carton (30 cartons/pallet)
Coverage: Commercial Unit: 175 ft² (16.2 m²) - Wet Coat thickness is 30 - 40 mils, 0.03" - 0.04" (0.8 - 1.2 mm) Use wet film gauge to check thickness.
Mini Unit: 50 ft2 (4.6m²) - Wet Coat thickness is 30 - 40 mils, 0.03" - 0.04" (0.8 - 1.2 mm) Use wet film gauge to check thickness.
