HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.
Equipped withMicroban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.
Features & Benefits
Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Bonds directly to metal
PVC and ABS plumbing fixtures only
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Changes in color from a light sage to an olive green when cured
Equipped with Microban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane
Rapid drying for a faster time to tile
Install tile. brick and stone directly onto membrane