Sales: 647 549 0973Office: 905 660 0973

HYDRO BAN® Quick Cure

HYDRO BAN® Quick Cure

HYDRO BAN Quick Cure is a rapid, thin, liquid applied ready-to-use waterproofing membrane that is ANSI A118.10 Compliant. Featuring wet-cure technology, this allows curing even in humid, cold and damp environments. Quick Cure allows for flood testing within 30 minutes from start of installation allowing contractors to install a shower system all in one day. Designed for both commercial and residential tile installations. Suited for interior substrates, Quick Cure creates a continuous waterproofing barrier with outstanding adhesion. It bonds directly to metal, PVC, stainless steel and ABS drain assemblies.


Features & Benefits

  • Can be used in humid, cold and damp environments.
  • Allows for flood testing in 30 min. at 70°F (21°C) or higher
  • Allows for crack isolation up to 1/16” when applied at 30 mils thick, anything over will require the use of fabric within any cove, corner, movement joint and other areas of transition
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Thin; only 0.012" (0.3 mm) thick when cured
  • “Heavy Service” rating per TCNA performance levels (RE: ASTM C627-18 Robinson Floor Test)
  • Exceeds ANSI A118.10
  • Exceptionally rapid cure time for quicker time to tile
  • Non-flammable
  • Install tile, brick and stone directly onto membrane
  • Eco-friendly, Low VOC
  • For gaps 1/16" (1.5 mm) or more see DS 670.4

For further information on delivery times, send us an enquiry